Biological activity and molecular mechanism of inactivation of Microcystis aeruginosa by ultrasound irradiation.

Harmful algal blooms (HABs) significantly impact on water quality and ecological balance. Ultrasound irradiation has proven to be an effective method for algal control. Nevertheless, the molecular mechanisms underlying the inactivation of M. aeruginosa by ultrasound are still unknown. In this study, the physiological activity and molecular mechanism of algal cells exposed to different frequencies of ultrasound were studied. The results indicated a pronounced inhibition of algal cell growth by high-frequency, high-dose ultrasound. Moreover, with increasing ultrasound dosage, there was a higher percentage of algal cell membrane ruptures. SEM and TEM observed obvious disruptions in membrane structure and internal matrix. Hydroxyl radicals generated by high-frequency ultrasound inflicted substantial cell membrane damage, while increased antioxidant enzyme activities fortified cells against oxidative stress. Following 2 min of ultrasound irradiation at 740 kHz, significant differential gene expression occurred in various aspects, including energy metabolism, carbohydrate metabolism, and environmental information processing pathways. Moreover, ultrasound irradiation influenced DNA repair and cellular apoptosis, suggesting that the algal cells underwent biological stress to counteract the damage caused by ultrasound. These findings reveal that ultrasound irradiation inactivates algae by destroying their cell structures and metabolic pathways, thereby achieving the purpose of algal suppression.

Fluorescence and molecular weight dependence of disinfection by-products formation from extracellular organic matter after ultrasound irradiation.

Algal blooms have a negative impact on the safety of drinking water. Ultrasonic radiation technology is an "environment-friendly" technology that is widely used in algae removal. However, this technology leads to the release of intracellular organic matter (IOM), which is an important precursor of disinfection by-products (DBPs). This study investigated the relationship between the release of IOM in Microcystis aeruginosa and the generation of DBPs after ultrasonic radiation as well as analyzed the generation mechanism of DBPs. Results showed that the content of extracellular organic matter (EOM) in M. aeruginosa increased in the order of 740 kHz >1120 kHz >20 kHz after 2 min of ultrasonic radiation. Organic matter with a molecular weight (MW) greater than 30 kDa increased the most, including protein-like, phycocyanin (PC) and chlorophyll a, followed by small-molecule organic matter less than 3 kDa, mainly humic-like substances and protein-like. DBPs with an organic MW range of less than 30 kDa were dominated by trichloroacetic acid (TCAA), while those with an MW greater than 30 kDa had the highest trichloromethane (TCM) content. Ultrasonic irradiation changed the organic structure of EOM, affected the amount and type of DBPs, and tended to generate TCM.

Multi-objective optimization of ultrasonic algae removal technology by using response surface method and non-dominated sorting genetic algorithm-II.

Ultrasonic technology is an environment-friendly method in algae-laden water treatment with the advantages of wonderful efficiency and no chemical additions. However, ultrasonic technology is costly and can lead to the release of algae organic matter (AOM). Few studies considered algae removal efficiency, water safety, and economy. In this study, a Response Surface Methodology (RSM) and Elitist Non-dominated Sorting Genetic Algorithm (NSGA-II) integrated method was used to investigate the influence of ultrasound parameters on algal removal efficiency band AOM release and conduct the multi-objective optimization of ultrasonic technology for satisfactory algal removal, environment protection, and improved economy. The maximum algae removal rate (ρ), minimal energy consumption, and minimal UV254 value of algal solution were calculated. Quadratic polynomial models were obtained to illustrate the relationship between ultrasonic parameters and the responses. Ultrasonic frequency was the most important factor affecting algal removal efficiency, and high frequency was beneficial for algal removal because of its contribution to the break of air bubbles. High power density significantly increased the UV254 value, and the concentration of soluble microbial metabolites and humic acid-like substances significantly increased after ultrasound. The optimization solutions calculated by NSGA-II showed low deviation from single-objective optimization solution by RSM, demonstrating that the multi-objective optimization results were reliable. This study presents a novel RSM and NSGA-II combined method in optimizing ultrasonic technology for effective, safe, and economic algal removal. The optimization results can provide references for ultrasonic parameters to be selected in practical applications.

Inactivation of harmful Anabaena flos-aquae by ultrasound irradiation: Cell disruption mechanism and enhanced coagulation.

Harmful algal blooms pose a potential threat to the safety of drinking water sources. Ultrasound is an effective method for algae removal. However, this method can lead to the release of algal organic matter and the effects and toxic mechanisms of ultrasound on Anabaena are still poorly understood. The destruction mechanism of Anabaena flos-aquae cells under different ultrasonic conditions, the safety of intracellular organic matter (IOM) release to water and the enhanced coagulation efficiency of ultrasound were studied. Results showed that high-frequency ultrasound was effective in breaking down algae cells. After 10 min ultrasonication at 20 kHz, 5 min at 740 kHz and 1 min at 1120 kHz, the algae cells were inactivated and algae growth was halted. Ultrasound radiation can lead to the release of IOM, primarily chlorophyll a and phycocyanin, followed by some tryptophan and humic substances, polysaccharides, and proteins. The sonicated ribosomes were considerably reduced, and the antioxidant system of cells was also damaged to some extent. The coagulation effect of algae cells was substantially improved after ultrasonication. Thus, the safety of algae cell removal could be improved by controlling the changes in physiological structure and IOM release of algae cells by adjusting the ultrasound parameters.

Novel cationic polymer modified magnetic chitosan beads for efficient adsorption of heavy metals and dyes over a wide pH range.

Wastewater containing highly toxic and non-biodegradable heavy metals and organic dyes poses a serious threat to ecological environment and human health. Adsorption has been regarded as a promising technology to purify this kind of wastewater. Therefore, it is of great importance to develop efficient adsorbents. Herein, a magnetically recyclable adsorbent Fe3O4-CS/PDAC was facilely fabricated by coating poly(acryloyloxyethyltrimethyl ammonium chloride)-modified chitosan on the surface of Fe3O4 nanoparticles. The morphology, physical-chemical and magnetic properties of as-prepared Fe3O4-CS/PDAC was fully characterized by various techniques. Its adsorption behaviors towards heavy metal Cr(VI) and organic dye sunset yellow (SY) were systematically investigated. Evidently, Fe3O4-CS/PDAC exhibited adsorption capacities of 163.93 and 769.23 mg/g for Cr(VI) and SY respectively, much higher than other reported adsorbents. Besides, batch experiment results showed that adsorption capacities decreased slightly with pH increasing from 2.0 to 10.0. Furthermore, Fe3O4-CS/PDAC could be easily separated and effectively regenerated after adsorption. The superior adsorption performance of Fe3O4-CS/PDAC could be attributed to the electrostatic interaction and ion exchange between target pollutants and the grafted cationic polymer. Owing to its high adsorption capacity over a wide pH range, rapid separation, easy regeneration and good reusability, Fe3O4-CS/PDAC has great potential for practical application in water treatment.

Ultrasound-assisted electrochemical treatment for phenolic wastewater.

With the rapid development of industry, especially the rapid rise of the chemical industry, the problem of water pollution is becoming more and more serious. Among them, the discharge of organic pollutants represented by phenolic substances has always been at the forefront. In this paper, ultrasound-assisted electrochemical treatment for phenolic wastewater is investigated. The effects of ultrasonic frequency, current, pH value and the amount of fly ash-loaded titanium TiO2-Fe3+ particles on phenol removal from phenol-containing wastewater are investigated. The experimental results demonstrate that the removal rate of phenol in phenol-containing wastewater is the best when ultrasonic frequency is 45 kHz, power is 200 W, the current is 1.2 A, pH is 5 and the dosage of fly ash-loaded titanium TiO2-Fe3+ particles is 3 g. In addition, microwave-assisted-Fenton reagent treatment for phenol wastewater is investigated. The effects of Fenton reagent dosage, initial pH value, microwave power density and radiation time on phenol degradation rate are investigated. The results show that microwave can accelerate the reaction rate, reduce the number of metal ions, save the process cost and reduce the difficulty of post-treatment. Finally, the research status of phenol wastewater treatment technology at the present stage is reviewed, and the future development direction is discussed.

Effects of ultrasound on Microcystis aeruginosa cell destruction and release of intracellular organic matter.

Harmful algal blooms negatively impact ecosystems and threaten drinking water sources. One potential method to effectively counteract algal blooms is ultrasonication. However, ultrasonication can easily lead to the release of intracellular organic matter (IOM). The purpose of this study was to investigate the relationship between the destruction of algal cells and IOM release at different ultrasound frequencies. Microcystis aeruginosa cells were ultrasonicated at 20 kHz with an intensity of 0.038 W/mL, 740 kHz with an intensity of 0.113 W/mL, and 1120 kHz with an intensity of 0.108 W/mL. The IOM release was detected by fluorescence spectroscopy in addition to the more commonly used haemocytometry and optical density. After ultrasonication for 15 min, the removal rate of algal cells reached 10.5% at 20 kHz, 9.46% at 740 kHz, and 35.4% at 1120 kHz. The 20 kHz and 740 kHz ultrasound caused local damage to algal cells and then disrupted them, whereas the 1120 kHz ultrasound directly disrupted most algal cells. The extracellular organic matter (EOM), which was increased by ultrasonication, mainly consisted of protein-like compounds, chlorophyll, and a small amount of humic-like substances. Gas vacuoles had been destructed before the cells were broken, as indicated by the decrease of cell size and the wrinkles on the cell surface. Moreover, the removal of algae cells while upholding integrity is more conducive to the safety of the water environment.

Removal of Microcystis aeruginosa by ultrasound: Inactivation mechanism and release of algal organic matter.

The efficacy of ultrasonic irradiation for removal of Microcystis aeruginosa and release of algal organic matter (AOM) was investigated under different ultrasound conditions, including ultrasonic frequency, power density, and time. Laboratory results suggested that the ultrasonic efficiency and the release of AOM were influenced by frequency, power density, and time. The mechanism of AOM algae removal by ultrasound was systematically explored. The inactivation of algae resulted from mechanical and chemical effects caused by ultrasound. Mechanical destruction and free-radical oxidation considerably affected the structure and physiological function of algal cells. The SEM and TEM images indicated that ultrasound could damage the cell membrane, wall, and organelle. Flow cell cytometry results showed decreases in the size, internal granularity, integrity, and activity of algal cells, revealing that ultrasound exerted severe damage to the structure and function of algal cells. The activity of the antioxidant system of algal cells was then studied by investigating changes in MDA, SOD, and CAT concentration after ultrasound to confirm the inactivation of the cells. The release of AOM was explored by determining changes in water quality indices (UV254, DOC, and SUVA) at 10 min and 48 h after ultrasound. This study provides information about the safety of ultrasound usage on algae removal and references for ultrasonic parameters to be selected to ensure effective and safe algae removal.

Enhanced coagulation by high-frequency ultrasound in Microcystis aeruginosa-laden water: Strategies and mechanisms.

Ultrasonic treatment has attracted much attention because of its physical and chemical effects that are distinct from those of chemical agents. In particularly, high-frequency ultrasound is known as an effective method because the theoretical resonance frequency of the gas vesicles in Microcystis aeruginosa is in the high frequency range (>100 kHz), which causes gas vesicles collapse and changes the settleability of the algal cells. In this work, the effects of the ultrasonic frequency, acoustic power density and duration on enhancing coagulation to remove turbidity in algae-laden water were studied. In order to explain the mechanism, the morphology of algae cells, the changes in extracellular organic substances, the zeta potential and the formation of hydroxyl radicals were analyzed systematically. Finally, Zeta potentials and flocs morphology after adding PAC were investigated to verify the mechanism. The results showed that the frequency exhibited fewer effects than power and duration on coagulation. SEM images showed that there were more severe cellular damages at 430 and 740 kHz than other frequencies. Sonication could cause the collapse of gas vesicle inside the cell, which was due to the instantaneous high pressure generated by the ultrasonic cavitation instead of the resonance. Furthermore, sonication would result in an increase in proteins in extracellular organic matter (EOM) with continuous ultrasonic irradiation, indicating that a small amount of proteins could promote coagulation and that the accumulation of proteins would inhibit coagulation. Free radical content testing showed that the production of excessive free radicals was often accompanied by a deterioration of the coagulation. The proper mechanical effects were the main mechanism of ultrasonic enhanced coagulation. Thus, it was recommended that the appropriate ultrasonic condition was the one that resulted in a small amount of protein leakage and little generation of free radicals, which occurred at 740 kHz and 0.02 W/mL in approximately 5 min, and would significantly enhance the turbidity removal rate in algae-containing water from approximately 80-90%.